Bag makers

Weighpack’s vertical flow packaging machines are designed and manufactured to meet the specific requirements of the hardware, fastener, and technical products industry.
By unwinding a film from a roll, a bag is formed by the foil being advanced over a forming shoulder and further along a forming tube.
One vertical and two horizontal welding jaws seal the top and bottom of the bag.
All our bag makers are equipped with upstream and downstream synchronization and touch screen HMI.
Our bag makers can optionally be delivered with

– Sealing jaws with electronically controlled impulse heating system
– Hole punch for “Euro slot” or other shapes for hanging display
– Motorized film reel unwinding
Product support, for heavy bags
– 45-degree angled model to reduce the impact of heavy products
– Empty film reel alarm

–  Capacity maximum up to 35 bags per minute
–  Bag length from 50 to 300 mm
–  Bag width from 60 to 235 mm
–  Bag weight up to 3 kg with support unit
–  Film thickness from 40 to 100 µm

– Capacity up to 30 bags per minute
– Bag length from 50 to 600 mm
– Bag width from 60 to 235 mm
– Bag weight up to 8 kg with support unit
– Film thickness from 40 to 200 µm
– Also available with magnetic orientation

 

 

– Capacity up to 20 bags per minute
– Bag length up to 480 mm
– Bag width up to 450 mm
– Bag weight up to 20 kg supported by belt conveyor
– Film thickness from 40 to 150 µm
– Low filling height 1000 mm from floor level

Further reading